The BVR19 Brush Chipper is Made for More!
With its large capacity and high-production volume reduction capabilities, this chipper is perfect for residential tree services, vegetation management lot and land clearing, maintenance contractors and municipalities. The BVR19BrushChipper boasts a huge list of options to customize the machine as well as more standard features than any other chipper in its class.
Remove the anxiety of engaging the chipper drum, damaged drive belts, and burned clutch discs and elevate your operating experience with the exclusive Morbark ZeroClutch.™ Simply start, throttle the machine to full RPM's and engage the feed control bar. The Morbark ZeroClutch features an integrated drum speed sensor that monitors the drum speed and will not allow the clutch to engage if material is lodged between the feed wheel and drum.
Please fill out the information below and a member of our team will be in touch with you!
Key Features
- Infeed-mounted control panel for increased jobsite efficiency.
- Modular design makes maintenance and repairs fast and easy.
- Morbark ZeroClutch™ monitors the drum speed and will not allow the clutch to engage if material is lodged between the feed wheel and drum.
- Reverse pivot assembly gives mechanical advantage for increased down pressure.
- Reversing auto feed system automatically stops forward feed and backs material away from drum for optimum engine performance.
- Side load anvil for quick adjustment and flipping of the anvil.
- Unit can be outfitted with a four-or-six cylinder diesel engine and choice of a single or tandem axle.
Specifications
- Height (single/tandem): 9'
- Width (single/tandem): 7'8"
- Length: 21'8"
- Gross weight (single, tandem): 9,000/10,500 lb
- Suspension (single axle): (1) 12,000 lb Torflex
- Suspension (tandem axle): (2) 7,000 lb Torflex
- Infeed opening (height x width): 39" x 64"
- Throat opening (height x width): 20" x 25 3/8"
- Drum (width x diameter): 32 5/8" x 30"
- Engine: PSI, CAT, Deutz
- Horsepower: 174–275 HP
- Fuel tank: (capacity) 40 gallons
- Hydraulic oil capacity: 18 gallons
- Frame: 6" C-Channel
- Tires: 235/75R x 17.5
- Hitch: 2.5" Pintle
- Height (single/tandem): 2.7 m
- Width (single/tandem): 2.3 m
- Length: 6.6 m
- Gross weight (single, tandem): 4,082/ 4,763 kg
- Suspension (single axle): 1 (5,443kg) Torflex
- Suspension (tandem axle): (2) 7,000 lb Torflex
- Infeed opening (height x width): 39" x 64"
- Throat opening (height x width): 20" x 25 3/8"
- Drum (width x diameter): 32 5/8" x 30"
- Engine: PSI, CAT, Deutz
- Horsepower: 174–275 HP
- Fuel tank: (capacity) 40 gallons
- Hydraulic oil capacity: 18 gallons
- Frame: 6" C-Channel
- Tires: 235/75R x 17.5
- Hitch: 2.5" Pintle